Mã lỗi OKI ES3640 — Trang 8/11
Code:
Tất cả lỗi (85)
001
002 ... 007
020 ... 024
025
030
031
032
036
037
040
041
042..045
048
049
050
051
052
060
062
063
070
072
073 ... 075
081
096
097
104
105
106
111 ... 117
121
123
124
125
126
128
131 ... 134
140 ... 142
144 ... 147
150 ... 153
154
155
160 ... 163
167
168
169
170 ... 175
172, 176
173, 177
179
180 ... 186
187
188
189
190
200 ... 202
203 ... 214
209
220
230
231
240 ... 248
910 ... 914
917
918
919
920
921
922
923
924
925
926
927
928
928
930
931
932
933
934
935
936
940
FOC, FOD, FFE, FFF
Display: Service Call 203: Error 204: Error 207: Error to 214: Error Power Off/on nnn: p 0xFOC: Error 0xFOD: Error 0xFFE: Error 0xFFF: Error
Description: CU Program Dysfunction
Causes: Detected illegal process with CU program
Display: Power On/off 209: DOWNLOAD ERROR
Description: Custom Media Table Download Error
Causes: Failed to download custom media table.
Display: Service Call 220: Error
Description: Print Satistic mismatch
Causes: HDD was removed or replaced after print statistic is set to ON.
Display: Service Call 230: Error
Description: RFID Reader not Installed
Causes: 1) RFID read device error 2) Does the Error take place again?
Display: Service Call 231: Error
Description: RFID Reader I/F Error
Causes: An interface error was detected with the RFID reader device. 01: communication error between the RFID reader and the engine PCB. 02: the transceiver circuit error of the RFID reader. 03: communication error between the RFID reader and the Tag chip. 04: the RFID Tag detection error (more than 4 chips).
Display: Service Call 240: Error to 245: Error 247: Error 248: Error
Description: Engine Program Memory Error
Causes: 240:Flash-memory hardware error 241:Duplex flash-memory error 242:Optional tray-2 flash-memory error 243:Optional tray-3 flash-memory error 244:Optional tray-4 flash-memory error 245:Optional tray-5 flash-memory error 247:Sub-CPU flash-memory error 248:Inverter flash-memory error
Display: Power Off/on 910: Error to 914: Error
Description: GDDC Error
Causes: 910:Tray1 GDDC Error 911:Tray2 GDDC Error 912:Tray3 GDDC Error 913:Tray4 GDDC Error 914:Tray3 GDDC Error
Display: Power Off/on 917: Error
Description: Belt Slit Sensor Error
Causes: The belt is not running properly. Does the error message still appear after rebooting?