• Code: 073
• Description: Video Error; Fault detected when image data was extended.
• Remedy: Power Off/On. Replace the PU/ CU board

• Code: 075
• Description: Video Error; Fault detected when image data was extended.
• Remedy: Power Off/On. Replace the PU/ CU board.

• Code: 077
• Description: The video decompress fault was detected on the image data expansion.
• Remedy: Replace the PU/ CU board

• Code: 081
• Description: The CU initializer detected an error in the backuped data.
• Remedy: Power Off/On. Replace the PU/ CU board.

• Code: 104
• Description: Engine EEPROM setting check was OK when power ON. Then detect read/ write error.
• Remedy: Power Off/On. Replace the PU/ CU board

• Code: 106
• Description: Abnormal engine control logic.
• Remedy: Power Off/On. Replace the PU/ CU board.

• Code: 112
• Description: Detected illegal 2nd Tray.
• Remedy: Is a 2nd Tray provided for this model installed? No Install a correct 2nd Tray.

• Code: 113
• Description: Detected illegal 3rd Tray.
• Remedy: Is a 3rd Tray provided for this model installed? No Install a correct 3rd Tray.