Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES7412

Code: -

Display: WDT ERROR R14=xxxx
Description: PU firmware runaway
Remedy: Does this error recur? Yes Turn on the power again. Replace the CU/ PU board.

Code: -

Display: COMMUNICATION ERROR
Description: I/F error between PU and CU
Remedy: Does this error recur? Yes Replace the CU/ PU board.

Code: -

Display: ASIC ERROR
Description: DCON access error
Remedy: Does this error recur? Yes Replace the CU/ PU board.

Code: 002 ... 007, 009 ... 011

Display: Restart the printer. 002: Error - 007: Error 009: Error - 011: Error
Description: CPU Exception
Remedy: Does the error display recur? If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU/PU board. Re-install the RAM DIMM. Replace the RAM DIMM.

Code: 020

Display: Service call 020: Error
Description: CU ROM Hash Check Error
Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU/PU board.

Code: 030

Display: Service call 030: Error
Description: CU RAM Check Error
Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU/PU board.

Code: 031

Display: Service call 031: Error
Description: CU Optional RAM Check Error
Remedy: Is installation of the RAM DIMM normal? Does the printer recover from the error when the RAM DIMM is replaced?
Re-install the RAM DIMM. Replace the RAM DIMM. Replace the CU/PU board.

Code: 040

Display: Service call 040: Error
Description: CU EEPROM Error
Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU/PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie