Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES9431 — Trang 3/8

Code: 077

Display: Power Off/On 077:Error xx
Description: Detected of abnormal condition during image data expansion
Remedy: Does this recur? Yes Power OFF/ON. Replace the printer control PCB

Code: 081

Display: Service Call 081:Error
Description:
Remedy: Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.

Code: 104

Display: Service Call 104:Error
Description: The engine EEPROM implementation check at power on showed no problem, but after that a read/write error was detected.
Remedy: Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.

Code: 106

Display: Service Call 106:Error
Description: Abnormal engine control logic
Remedy: Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.

Code: 108

Display: Service Call 108:Error
Description: 01: Detection of a watchdog timer error 02: Detection of an undefined interruption 03: Runaway of the CPU on the PU due to noise etc. 04: Runaway of the Port CPU due to noise etc. 05: Failure of access to the Dcon circuit of the printer control PCB 09: Detection of an error in clock adjustment to the duplex unit 0B: Detection of an error in clock adjustment to Tray 2 0C: Detection of an error in clock adjustment to Tray 3 0D: Detection of an error in clock adjustment to Tray 4 0E: Detection of an error in clock adjustment to Tray 5 0F: Communication failure with the spot color PCB 10: Runaway of the Driver CPU due to noise etc.
Remedy: 01: Detection of a watchdog timer error Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.
02: Detection of an undefined interruption Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.
03: Runaway of the CPU on the PU due to noise etc. Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.
04: Runaway of the Port CPU due to noise etc. Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.
05: Failure of access to the Dcon circuit of the printer control PCB Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.
09: Detection of an error in clock adjustment to the duplex unit Does this error message reappear after power restoration? Yes Replace the unit concerned. Does this error message reappear after power restoration? Yes Replace the printer control PCB.
0B: Detection of an error in clock adjustment to Tray 2 Does this error message reappear after power restoration? Yes Replace the unit concerned. Does this error message reappear after power restoration? Yes Replace the printer control PCB.
0C: Detection of an error in clock adjustment to Tray 3 Does this error message reappear after power restoration? Yes Replace the unit concerned. Does this error message reappear after power restoration? Yes Replace the printer control PCB.
0D: Detection of an error in clock adjustment to Tray 4 Does this error message reappear after power restoration? Yes Replace the unit concerned. Does this error message reappear after power restoration? Yes Replace the printer control PCB.
0E: Detection of an error in clock adjustment to Tray 5 Does this error message reappear after power restoration? Yes Replace the unit concerned. Does this error message reappear after power restoration? Yes Replace the printer control PCB.
0F: Communication failure with the spot color PCB Power OFF/ON. Does this error recur? Yes Replace the spot color PCB. Does this error recur? Yes Replace the printer control PCB.
10: Runaway of the Driver CPU due to noise etc. Does this error recur? Yes Power OFF/ON. Replace the driver relay PCB. Does this error recur? Yes Replace the printer control PCB.

Code: 111

Display: Service Call 111:Error
Description: A duplex unit for another model was detected.
Remedy: Is a duplex unit provided for this model installed? Yes Install a correct duplex unit.

Code: 112

Display: Service Call 112:Error
Description: A 2nd Tray for another model was detected.
Remedy: Is a 2nd Tray provided for this model installed? Yes Install a correct 2nd Tray.

Code: 113

Display: Service Call 113:Error
Description: A 3rd Tray for another model was detected.
Remedy: Is a 3rd Tray provided for this model installed? Yes Install a correct 3rd Tray.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie