Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES9542 — Trang 8/8

Code: 254

Display: Service Call 254:Error
Description: An unexpected error occurred during initialization of the Security mode. Error cause information is displayed after the error code number.
Remedy: Power OFF/ON. Does this error message reappear? Yes Regenerate an encryption key. If it doesn’t solve the problem, replace the CU PCB.

Code: 257

Display: Service Call 257:Error
Description: An unexpected error occurred during initialization of the HDD. Error cause information is displayed after the error code number.
Remedy: Power OFF/ON. Does this error message reappear? Yes Format the HDD again. If it does not solve the problem, replace the HDD

Code: 901, 902

Display: Power Off/On 901:Error 902:Error
Description: Short circuit (901) or open circuit (902) with the belt thermistor was detected.
Remedy: Check the belt thermistor wiring. (Is there any abnormal condition with the belt unit, contact substrate which is the tag terminal PCB of the printer unit, or the cable)? Yes Replace the part or the belt unit. No Replace the driver relay PCB.

Code: 903, 904

Display: Power Off/On 903:Error 904:Error
Description: The belt thermistor detected abnormal temperature. 903:too high 904:too low
Remedy: Check the belt thermistor wiring. (Is there any abnormal condition with the belt unit, contact substrate which is the tag terminal PCB of the printer unit, or the cable)? Yes Replace the part or the belt unit. No Replace the driver relay PCB.

Code: 993

Display: Service Call 993:Error
Description: An error was detected with the paper thickness sensor power cable
Remedy: Power OFF/ON. Does this error recur? Yes Replace the paper thickness sensor and the cable. Does this error recur? Yes Replace the printer control PCB.

Code: 994

Display: Service Call 994:Error
Description: A fuser where a high temperature error was detected is installed.
Remedy: Power OFF/ON. Does this error recur? Yes Replace the fuser unit.

Code: F0C

Display: Power Off/On F0C:Error
Description: CU program error
Remedy: Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.

Code: FFF

Display: Power Off/On FFF:Error
Description: CU program error
Remedy: Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie