Mã lỗi OKI LE810
Code:
01
Display: MACHINE ERROR
Description: 01 Machine
Remedy: 1. Ensure all wiring harnesses are properly connected. 2. Replace main circuit board
Code:
02
Display: EEPROM ERROR
Description: 02 Flash ROM
Remedy: 1. Ensure correct communication protocols. 2. Check cables, cycle printer power and resend. 3. Replace board.
Code:
03
Display: PARITY ERROR
Description: 03 Parity
Remedy: 1. Ensure correct communication parameters. 2. Check cables, cycle printer and resend. 3. Replace board.
Code:
04
Display: OVERRUN ERROR
Description: 04 Overrun
Remedy: 1. Check and correct communication cables and settings. 2. Reboot printer and try again.
Code:
05
Display: FRAMING ERROR
Description: 05 Framing
Remedy: 1. Ensure host system and interface settings match. 2. Check and correct communication cables (null modem serial cable required).
Code:
06
Display: BUFFER OVER
Description: 06 Buffer Overflow
Remedy: 1. Size of received data exceeds size of receiving buffer. 2. Establish the correct communication protocol.
Code:
07
Display: HEAD OPEN
Description: 07 Head Open
Remedy: 1. Properly latch the print head. 2. Replace the head-open switch.
Code:
08
Display: PAPER END
Description: 08 Paper End
Remedy: 1. Ensure media is properly loaded. 2. Clean sensor transmit/receive surfaces. 3. Ensure correct sensor configuration.