Remedy: Is the connector of the fan connected properly? Does the error occur again? Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
Remedy: Is the LED head installed properly? Is the LED head fuse broken? Does the error occur again? Install the LED head unit. Check the LED head fuse. Check the fuse. Turn off and on the MFP. Replace the LED head unit.
Remedy: Is the image drum unit installed properly? Does the error occur again? Is the MFP recovered by replacing the toner sensor board. Re-install it. Turn off and on the MFP. Be sure of the cable connection from the CU/PU board to the toner sensor board, and then replace the toner sensor board. Replace the CU/PU board.
Description: Toner sensor detection error (163=K). This error does not occur with the MFP in the factory shipped configuration.
Remedy: Is the toner cartridge installed? Is the toner slide shutter set? Install the toner cartridge. Turn it to the fixed position. Turn off and on the MFP. Replace the toner sensor assembly.
Remedy: Does an error message appear? Does the error occur again? Yes Turn off and on the MFP. Turn off and on the MFP after leaving it for 30 minutes.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.