Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MB470 — Trang 4/8

Code: 105

Display: Service call
105: Error
Description: Engine EEPROM mounting check error when the power supply is turned on.
Remedy: Does the error recur? Yes Power supply Off/On Replace 86M board

Code: 106

Display: Service call
106: Error
Description: The engine control logic is abnormal
Remedy: Does the error recur? Yes Power supply Off/On Replace 86M board

Code: 120

Display: Service call
120: Error
Description: 86M Board Fan Motor Error
Remedy: Does the fan rotate? • Yes Replace the main board. • No Is the fan connector of the high-voltage power/ sensor board connected? • No Connect the fan connector appropriately. • Yes Does F3-fuse of 86M board open? • Yes Change the F3-fuse. • Yes Replace the fan or main board.

Code: 121

Display: Service call
121: Error
Description: High-voltage power supply I/F error
Remedy: Is the cable between 86M board and the high-voltage power supply unit correctly connected? Isn't there defective contact point?
Reconnect correctly. Check the defective contact point of high-voltage system. Replace the high voltage power supply.

Code: 122

Display: Service call
122: Error
Description: Power Supply Fan Motor Error
Remedy:

Code: 123

Display: Service call
123: Error
Description: Environmental humidity abnormal/ humidity sensor disconnection
Remedy: Is the cable between the 86M board and the high-voltage power supply unit correctly connected?
Reconnect correctly. Replace the high-voltage power supply.

Code: 124

Display: Service call
124: Error
Description: Environmental temperature abnormality
Remedy: Does the error recur? Yes Power supply Off/On Check the connector connection of Thermistor. Replace Thermistor or 86M board.

Code: 126

Display: Service call
126: Error
Description: The dewy of the device is detected
Dew condensation occurs easily after the device is carried in from outside.
After leaving it at room temperature for 2 hours to half a day, turn on the power again.
Remedy: Dew condensation occurs easily after the device is carried in from outside. After leaving it at room temperature for 2 hours to half a day, turn on the power again. Does the error recur? Yes Turn on the power again after leaving the device for hours. Replace the high-voltage power supply.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie