Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MB480 — Trang 3/8

Code: 065

Display: Service call
065: Error
Description: NIC Combination Error
Remedy: Replace 86M board

Code: 066

Display: Service call
066: Error
Description: FAX Combination Error
Remedy: Is FX-5 board used? No use FX-5 board.

Code: 070

Display: Service call
070: Error
Description: PostScript Internal Error
Remedy: Is the error message displayed again? Yes Power supply Off/On Replace 86M board

Code: 072

Display: Service call
072: Error
Description: Engine I/F Error I/F Error between PU and CU
Remedy: Replace 86M board

Code: 073

Display: Service call
073: Error
Description: Video Error When the image data sprads, defect is detected. (Incorrect data receive)
Remedy: Does the error recur? Yes Change the PC to high spec or lower the resolution, and then print again. Replace 86M boar

Code: 074, 075

Display: Service call
074: Error
075: Error
Description: Video Error When the image data spreads, defect is detected.
Remedy: Replace 86M board

Code: 081

Display: Service call
081: Error
Description: Difference between version of CU firm and EEPROM
Remedy: Does the error recur? Yes Do EEPROM Initialization. (Turn on the power supply by Cover-open & pressing START key & pressing CANCEL switch). Because the Mac address will disappear with this initialization, lease reset Mac address by using the maintenance utility. Replace 86M board

Code: 104

Display: Service call
104: Error
Description: EngineEEPROM mounting check is OK with turning on the power supply, after that, lead/light error is detected
Remedy: Does the error recur? Yes Power supply Off/On Replace 86M board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie