Display: Inspection is required. 172 : Error 173 : Error
Description: A fuser thermistor temperature error (high or low temperature) was detected.
Remedy: Does the error occur again? Turn off and on the MFP. Replace the fuser unit. Replace the lowvoltage power supply, and then replace the CU/PU board when the error occurs again.
Display: Inspection is required. 200 : Error 202 : Error
Description: PU firmware download error An error occurred in rewriting the PU firmware.
Remedy: An error occurred in rewriting the PU firmware. Turn off and on the MFP, and then redownload it (In general use of the MFP, this re-writing is not performed and this error does not occur).
Description: Custom Media Type table downloading failure Custom Media Type table downloading failed.
Remedy: Custom Media Type table downloading failed. Turn off and on the MFP, and then redownload it (In general use of the MFP, this downloading is not performed and this error does not occur).