Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MB562w — Trang 3/5

Code: 112

Display: Inspection is required. 112 : Error
Description: The 2nd tray for a model different from the MFP was detected.
Causes: Is the 2nd tray for the MFP installed?

Code: 121

Display: Inspection is required. 121 : Error
Description: High-voltage power supply interface error
Causes: Is the cable between the CU/ PU board and the highvoltage power unit connected properly? Is a contact faulty?

Code: 122

Display: Inspection is required. 122 : Error
Description: Power Supply Fan error
Causes: Does the fan at the rear of the MFP operate? Is the connector of the fan connected properly?

Code: 123

Display: Inspection is required. 123 : Error
Description: Ambient humidity error or non connection of humidity sensor
Causes: Is the cable from the CU/PU board to the toner sensor board connected properly?

Code: 124

Display: Inspection is required. 124 : Error
Description: Ambient temperature error
Causes: Is the cable from the CU/PU board to the toner sensor board connected properly?

Code: 126

Display: Power OFF/ON 126 : Error
Description: Sensor Dewed Error
Causes:

Code: 127

Display: Inspection is required. 127 : Error
Description: An error of exhaust fan of the Fuser
Causes: Is the fan's connector properly connected? Does the error occur again?

Code: 128

Display: Inspection is required. 128 : Error 05
Description: Image drum fan error
Causes: Is the connector of the fan connected properly? Does the error occur again?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie