Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MC160MFP — Trang 3/4

Code: 0F51

Description: Waste toner full sensor malfunction
Causes: • It is determined that the LED and photo receiver are faulty through a check made when a new imaging cartridge is detected.

Code: 1038

Description: Engine connect error
Causes: • Printer control board (PRCB) to MFP board (MFPB) connection failure. • The copier determines that there is an error if the print control board (PRCB) fails to send an acknowledgement signal to the MFP board (MFPB) for a given period of time or more. • An error command signal is transmitted from the MFP board (MFPB) to printer control board (PRCB). • An error status signal is transmitted from the printer control board (PRCB) to MFP board (MFPB).

Code: 13C0

Description: Print control board malfunction
Causes: • A communication error occurs in print control board (PRCB).

Code: 13DD

Description: Backup data error
Causes: • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON

Code: 13E2

Description: Engine flash ROM write error
Causes: • Flash ROM writing is found faulty during a check.

Code: 13F0

Description: Engine control failure
Causes: • An undefined malfunction occurs in the engine section (PRCB, etc.).

Code: 14A3

Description: IR lamp malfunction
Causes: • The intensity of the light emitted from the exposure lamp of the scanner falls short of the specified value.

Code: 3C00, 3C10, 3C40

Description: Trouble related to security
Causes: • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie