Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MC351

Code: 001

Display: Inspection is required. 001 : Error
Description: Machine Check Exception
A hardware error was detected (board failure or insufficient power supply capacity).
Remedy: Replace the CU/ PU board.

Code: 002, 006, 009, 011

Display: Power OFF/ON 002 : Error 006 : Error 009 : Error 011 : Error
Description: CPU Exception
Remedy: Is the error display provided again?
Remove any RAM DIMM and turn off and on the MFP. Replace the CU/ PU board. Reinstall the RAM DIMM.

Code: 020

Display: Inspection is required. 020 : Error
Description: CU ROM Hash Check Error
Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.

Code: 024, 025

Display: Inspection is required. 024 : Error 025 : Error
Description: Kanji Font Error
Remedy:

Code: 030

Display: Inspection is required. 030 : Error
Description: CU RAM Check Error
Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.

Code: 031, 036

Display: Inspection is required. 031 : Error 036 : Error
Description: CU optional RAM check error
Remedy: Is RAM DIMM installed properly? Does the MFP recover by replacing the RAM DIMM?
Reinstall the RAM DIMM. Replace the RAM DIMM. Replace the CU/ PU board.

Code: 040

Display: Inspection is required. 040 : Error
Description: CU EEPROM error
Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.

Code: 041

Display: Inspection is required. 041 : Error
Description: CU flash memory error or CU board flash ROM error
Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie