Description: Parameter matching check error Reading from or writing into EEPROM or flash memory cannot be made properly.
Remedy: Reading from or writing into EEPROM or flash memory cannot be made properly. Turn off and on the MFP. Replace the CU/PU board when the symptom persists.
Description: High-voltage power supply interface error
Remedy: Is the cable between the CU/ PU board and the highvoltage power unit connected properly? Is a contact faulty? Reconnect it properly. Check the highvoltage line for no poor connection. Replace the highvoltage power supply.
Remedy: Does the fan at the rear of the MFP operate? Is the connector of the fan connected properly? Be sure of the connection of the fan. Replace the CU/PU board. Connect the fan properly. Replace the CU/PU board.