Description: A communication error of the scanner unit The Controller detected an error after communication between the Controller and scanner unit was established.
Remedy: Call for service to review the connection between the scanner and printer or to replace the device if the symptom persists after you turn on the power unit again.
Description: The timeout of command communication of the scanner The timeout of command communication was detected between the Controller and scanner unit (A sub code indicates a cause). 01: There is no ACK for a command to start scanning. 02: There is no ACK for a command to cancel scanning. 03: There is no ACK for a command to cancel SIP.
Remedy: Record a value displayed far right at the bottom of LCD and turn off/on the power unit.
Description: A communication error of the scanner unit The scanner unit detected an error after communication between the Controller and scanner unit was established.
Remedy: Call for service to review the connection between the scanner and printer or to replace the device if the symptom persists after you turn on the power unit again.