Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MC873 — Trang 7/14

Code: 154

Display: Inspection is required. 154:Error
Description: The belt unit fuse blown out.
Causes:

Code: 155

Display: Inspection is required. 155:Error
Description: The fuser unit fuse blown out.
Causes:

Code: 160 ... 163

Display: Inspection is required. 160:Error Inspection is required. 161:Error Inspection is required. 162:Error Inspection is required. 163:Error
Description: Toner sensor detection error (160=Y, 161=M, 162=C, 163=K) This error does not occur with the factory default settings.
Causes: Is the toner cartridge installed? Is the lock lever of the toner set? Does this error recur?

Code: 166

Display: Inspection is required. 166:Error xx
Description: An abnormality was detected with the power supply temperature thermistor. 01 : The power supply thermistor is detected as shorted. 02 : The power supply thermistor is detected as open. 03 : The power supply thermistor indicates high temperature error. 04 : The power supply thermistor indicates low temperature error.
Causes: 01, 02: Does this error recur? Does this error recur? Does this error recur? 03: Does this error recur? Does this error recur? Does this error recur? 04: Does this error recur? Does this error recur? Does this error recur?

Code: 167

Display: Inspection is required. 167:Error
Description: An abnormality was detected with the thermistor.
Causes: Is the error message displayed? Does this error recur?

Code: 168

Display: Inspection is required. 168:Error xx
Description: An abnormality was detected with the Compensation Thermistor 01 : The compensation thermistor is detected as shorted. 02 : The compensation thermistor is detected as open. 03 : The compensation thermistor indicates high temperature error. 04 : The compensation thermistor indicates low temperature error.
Causes: Is the error message displayed? Does this error recur?

Code: 169

Display: Inspection is required. 169:Error xx
Description: An abnormality was detected with the Upper side Thermistor 01 : The upper side thermistor is detected as shorted. 02 : The upper side thermistor is detected as open. 03 : The upper side thermistor indicates high temperature error. 04 : The upper side thermistor indicates low temperature error.
Causes: Is the error message displayed? Does this error recur?

Code: 170

Display: Inspection is required. 170:Error
Description: Short circuit of the heat roller Thermistor was detected.
Causes: Does this error recur?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie