Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MC873dn — Trang 5/14

Code: 105

Display: Inspection is required. 105:Error
Description: Not detect the EEPROM at power on
Causes:

Code: 106

Display: Inspection is required. 106:Error
Description: Detect the error at engine control logic
Causes:

Code: 111

Display: Inspection is required. 111:Error
Description: A duplex unit for another model was detected
Causes: Is a duplex unit provided for this model installed?

Code: 112

Display: Inspection is required. 112:Error
Description: A Tray2 for another model was detected
Causes: Is a Tray2 provided for this model installed?

Code: 113

Display: Inspection is required. 113:Error
Description: A Tray3 for another model was detected.
Causes: Is a Tray3 provided for this model installed?

Code: 114

Display: Inspection is required. 114:Error
Description: A Tray4 for another model was detected.
Causes: Is a Tray4 provided for this model installed?

Code: 120

Display: Inspection is required. 120:Error
Description: PU cooling FAN error
Causes: Is the FAN connector connected correctly?

Code: 121

Display: Inspection is required. 121:Error
Description: High voltage power supply interface error
Causes: Is the cable connecting the CU board to the high voltage power supply unit connected properly? Is there any defective contact point?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie