• Code: CE52
• Description: Dew condensation of the printer is detected.
• Causes: This error can easily occur when a printer is brought in to indoor from outdoor. Leave the printer for 2 hours or half day under room temperature, and turn on the power again. Does this error recur?
• Remedy: After leaving a printer under room temperature, turn on the power again. Replace the Board 8TH.

• Code: CE7A
• Description: ID Up/Down position detection error
• Causes: Is the ID unit caught by anything when it is removed and reinstalled? Does this error recur?
• Remedy: Re-install the ID unit. Turn on the power again. Replace the high voltage power supply.

• Code: CE85
• Description: LED head detection error (CE85=K)
• Causes: Is the LED head connected normally? Is the LED HEAD fuse brown? Does this error recur?
• Remedy: Install the LED head unit normally. Check the LED HEAD fuse. After checking fuse Turn on the power again. For the method of checking the LED head unit fuse, refer to section 7.6.

• Code: D108
• Description: When LCF can not Lift up.
• Causes:
• Remedy: Set the Paper of the LCF Tray again.

• Code: D109
• Description: Detect the paper capacity is over.
• Causes:
• Remedy: Set the Paper of the LCF Tray again.

• Code: D216
• Description: Reversal cover is open.
• Causes:
• Remedy: Close the Exit Cover.

• Code: D3F1
• Description: Occur:The drum counter is over the life limit, and detect toner empty.
• Causes:
• Remedy: Push the ONLINE SW when change the new Image Drum.

• Code: D3F2
• Description: Occur:Printing 500 page, after the drum counter is over the life limit, and detect toner empty.
• Causes:
• Remedy: Push the SW when change the new Image Drum and Cover open close.