Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MPS930b — Trang 13/19

Code: H5-33

Description: Puncher Move Home SENSOR ON Fail
Causes: The Puncher Move Home Sensor is not turned ON even when the specified time passed after the Puncher Move Motor is ON. Or the Puncher Move Home Sensor is turned OFF again after the Puncher Move Home Sensor is turned ON and the Puncher Move Motor stopped its rotation.

Code: H5-34

Description: Puncher Move Home SENSOR OFF Fail
Causes: The Puncher Move Home Sensor is not turned OFF even when the specified time passed after the Puncher Move Motor is ON. Or the Puncher Move Home Sensor is turned ON again after the Puncher Move Home Sensor is turned OFF and the Puncher Move Motor stopped its rotation.

Code: H5-4

Description: Finisher NVM R/W error
Causes: A read/write error occurred on the NVM of the PWB MAIN-C.

Code: H5-7

Description: MCU-Finisher comm. error
Causes: A communication error occurred between the PWBA MCU F and the Finisher.

Code: H5-8

Description: Finisher type error
Causes: A different type of Finisher is connected.

Code: H5-81

Description: Eject Clamp Home SENSOR ON Fail
Causes: The Eject Clamp Home Sensor is not turned ON within 500 ms after the Eject Clamp Up starts.

Code: H5-82

Description: Eject Clamp Home SENSOR OFF Fail
Causes: The Eject Clamp Home Sensor is not turned OFF within 200 ms after the Eject Clamp Down starts.

Code: H5-83

Description: Set Clamp Home SENSOR ON Fail
Causes: The Set Clamp Home Sensor is not turned ON within 200 ms after the Set Clamp starts operating.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie