Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI proColor C910 — Trang 4/11

Code: 105

Display: Service Call 105: Error
Description: When turning ON the power, failed to detect the EEPROM (presence).
Remedy: Is there an EEPROM? Does the Error take place again?
Check to see if there is an EEPROM. If not, mount an EEPROM. Mount the EEPROM. Replace engine control PCB (S2X).

Code: 106

Display: Service Call 106: Error
Description: Error detected in engine control logic.
Remedy: Does the Error take place again? Replace engine control PCB (S2X).

Code: 111 ... 117

Display: Service Call 111: Error to 117: Error
Description: An optional unit for another model was detected. 111: Duplex unit 112: 2nd Tray 113: 3rd Tray 114: 4thTray 115: 5th Tray 116: Finisher 117: Inverter
Remedy: Is the proper optional unit for that model mounted? Mount the proper optional unit. Check the connection. Then turn ON the power again. Replace the unit if operations is not restored.

Code: 121

Display: Service Call 121: Error
Description: High Voltage Power Supply I/F Error
Remedy: 1) Is the PU PCB high voltage power cable properly connected?
Connect properly Check to see if there is any contact-defects in the high voltage system. Replace High Voltage Power Unit

Code: 123

Display: Service Call 123: Error
Description: Sensor detects an inappropriate relative humidity for the operating environment.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Replace the environmental sensor.

Code: 124

Display: Service Call 124: Error
Description: Sensor detects an inappropriate room temperature for the operating environment.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Replace the environmental sensor.

Code: 125

Display: Service Call 125: Error
Description: Error detected in MPT home position.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Replace MPT.

Code: 126

Display: Turn OFF the power and wait for awhile. 126: Dew Error
Description: Sensor Dew Error
Remedy: Sensor Dew Error Detected Wait a while then turn ON power again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie