Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI proColor C920WT — Trang 6/11

Code: 167

Display: Service Call 167: Error
Description: Thermistor Slope Error
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 168

Display: Service Call 168: Error
Description: Compensation Thermistor Error
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 169

Display: Service Call 169: Error
Description: Upper Side Thermistor Error
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 170 ... 175

Display: Service Call 170: Error 171: Error 174: Error 175: Error
Description: Fuser Thermistor shortcircuit or Open is detected (High Temperature (HOT) or Low Temperature (COLD))
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 172 ... 176

Display: Service Call 172: Error 176: Error
Description: Thermistor indicates High Temperature (HOT) Error.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 173 ... 177

Display: Service Call 173: Error 177: Error
Description: Thermistor indicates Low Temperature (COLD) Error.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Leave in that state for 30 minutes then turn ON power again.

Code: 179

Display: Service Call 179: Error
Description: Wrong Fuser Standard
Remedy: 1) Is the model and power voltage of the fuser mounted proper? 2) Fuser is properly mounted, but Error results again.
Assemble the proper fuser. Check to see that the fuser is properly assemble. Replace fuser.

Code: 180 ... 186

Display: Service Call 180: Error to 186: Error
Description: The engine detects communication is not possible with the optional unit.
180:Envelope Feeder (Unused) 181:Duplex unit 182:Tray2 unit 183:Tray3 unit 184:Tray4 unit 185:Tray5 unit 186:Finisher unit
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
Turn ON power again. Replace optional unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie