Danh mục sản phẩm

Code :

Code: E5-05
Description: SPC Firmware Failure
Causes: 1. SPC PCB is defective.

Code: E5-11
Description: Thermistor, Toner Sensor
Causes: 1. SC/Engine PCB connector is disconnected. 2. SC/Engine PCB is defective.

Code: E5-12
Description: Main CPU/SPC Interface Error
Causes: 1. SC/SPC PCB connector is disconnected. 2. SC/SPC PCB is defective.

Code: E7-90
Description: Hardware Key Error
Causes: Incorrect Hardware Key is installed.

Code: J00
Description: The Registration Sensor did not detect paper within a predetermined time after paper started feeding. (Sheet Bypass)
Causes:

Code: J01
Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:

Code: J02
Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:

Code: J43
Description: The Exit Sensor does not detect paper within a predetermined time after the Fuser Unit Paper Exit Sensor is activated.
Causes:

< 1 2 3 4 5 >

0