Danh mục sản phẩm

Code :

Code: J44
Description: The Exit Sensor keeps detecting paper after a predetermined time.
Causes:

Code: J70
Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.)
Causes:

Code: J71
Description: Original was longer than 78.7 in (2m). (Information Code 031 or 032 is printed on the Transaction Journal instead.)
Causes:

Code: J79
Description: The ADF Read Point Sensor keeps detecting paper in the ADF.
Causes:

Code: J80
Description: The Automatic Duplex Unit (ADU) Entrance Sensor does not detect paper within a predetermined time.
Causes:

Code: J82
Description: The ADU Exit Sensor does not detect paper within a predetermined time after ADU Middle Sensor is activated.
Causes:

Code: J83
Description: The ADU Entrance Sensor keeps detecting paper after a predetermined time has lapsed.
Causes:

Code: J90
Description: The PRINT signal is not received within 1 minute after the FEED signal is received.
Causes:

< 1 2 3 4 5 >

0