Danh mục sản phẩm

Code :

Code: E7-12
Description: Scanner Lamp is disconnected
Causes: SC PCB is defective.

Code: J00
Description: The Registration Sensor did not detect paper within a predetermined time after paper started feeding. (Sheet Bypass)
Causes:

Code: J01
Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:

Code: J02
Description: The 2nd Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:

Code: J03
Description: The 3rd Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (3rd Feeder Unit)
Causes:

Code: J04
Description: The 4th Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (4th Feeder Unit)
Causes:

Code: J07
Description: The Registration Sensor did not detect paper within a predetermined time after paper feed from 2nd Feeder Unit. (2/3/4 Feeder Unit)
Causes:

Code: J08
Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating on the 3rd Feeder Unit. (3/4 Feeder Unit)
Causes:

< 1 2 3 4 5 6 > Last ›

0