Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic DPC263 — Trang 15/16

Code: E7-54

Description: Finisher Punch Communication
Causes: 1. Finisher PCB is defective. 2. Punch PCB is defective.

Code: E7-55

Description: Finisher Punch Power Supply
Causes: 1. Punch PCB is defective.

Code: E7-56

Description: Finisher Punch Registration Sensor
Causes: 1. Punch Registration Sensor is defective. 2. Punch PCB is defective.

Code: E7-57

Description: Finisher Punch Sensor (Horizontal Registration)
Causes: 1. Saddle Folding Sensor is defective. 2. Punch PCB is defective.

Code: E7-58

Description: Finisher Punch Sensor (Waste Full)
Causes: 1. Punch Sensor is defective. 2. Punch PCB is defective.

Code: E7-59

Description: Finisher Staple Motor
Causes: 1. Stack Tray Paper Height detection Sensor, or Paper Hold Lever detection Sensor is defective, or the connector is disconnected. 2. Upper Limit detection Sensor is defective. 3. Upper Limit detection Sensor connector is disconnected. 4. PCB is defective.

Code: E7-60

Description: Finisher Aligning: Rear Motor
Causes: 1. Rear Aligning Home Position Sensor is defective. 2. Rear Aligning Motor is defective.

Code: E7-61

Description: Finisher Aligning: Front Motor
Causes: 1. Front Aligning Home Position Sensor is defective. 2. Front Aligning Motor is defective.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie