Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic DPC354 — Trang 16/16

Code: E7-62

Description: Finisher Aligning: Stapler
Causes: 1. Stapler Jam in the Cartridge. 2. Stapler Sensor is defective. 3. Stapler Motor is defective.

Code: E7-63

Description: Finisher Backup RAM 1 (Punch) Data Error
Causes: 1. Punch PCB is defective.

Code: E7-64

Description: Finisher Backup RAM 2 (Finisher) Data Error
Causes: 1. Finisher Controller PCB is defective.

Code: E7-65

Description: Finisher Communication Error (EC PCB-Finisher PCB)
Causes: 1. Finisher ROM Version is incorrect. 2. EC Firmware Version is incorrect.

Code: E7-90

Description: Hardware Key Abnormal
Causes: 1. Incorrect Hardware Key is installed. 2. Hardware Key is defective.

Code: E7-91

Description: Data Security Kit Abnormal
Causes: Hardware Key for Data Security Kit is not installed.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie