Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic U9000 — Trang 2/5

Code: E5-05

Description: SPC Firmware Failure
Causes: 1. SPC PCB is defective.

Code: E5-11

Description: Thermistor, Toner Sensor
Causes: 1. SC/Engine PCB connector is disconnected. 2. SC/Engine PCB is defective.

Code: E5-12

Description: Main CPU/SPC Interface Error
Causes: 1. SC/SPC PCB connector is disconnected. 2. SC/SPC PCB is defective.

Code: E7-90

Description: Hardware Key Error
Causes: Incorrect Hardware Key is installed.

Code: J00

Description: The Registration Sensor did not detect paper within a predetermined time after paper started feeding. (Sheet Bypass)
Causes:

Code: J01

Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:

Code: J02

Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:

Code: J43

Description: The Exit Sensor does not detect paper within a predetermined time after the Fuser Unit Paper Exit Sensor is activated.
Causes:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie