Mã lỗi Panasonic UF5600 — Trang 5/9
Description: Remote side attempted to receive message from your machine in polling communication.
Causes: Inform the remote side that your machine does not have the polling transmission feature.
Description: Receiver did not detect post command, such as EOP, MPS, EOM, etc.
Causes: Transmitter is defective. Line quality is poor. (RTC signal is distorted due to line noise) MAIN PCB is defective.
Description: Receiver returned RTN in response to post message.
Causes: Line quality is poor. (There are excessive errors in received data) MAIN PCB is defective.
Description: T1 timer (35 sec.) elapsed without detecting 300 bps signal.
Causes: There is wrong incoming call. (non-facsimile communication) Transmitter is defective. MAIN PCB is defective.
Description: Busy Tone is detected after sending NSF Signal.
Causes: Remote station disconnected the line. Wrong number is dialled.
Description: Content of NSF (or DIS) or NSC (or DTC) was invalid.
Causes: There is an incompatibility.
Description: DCN received to NSF/CSI/DIS transmitted.
Causes: The interface is incompatible.
Description: CD (response from Modem) did not turn OFF within 180 sec. after receiver detected FLAG signal.
Causes: Remote unit is defective. MAIN PCB is defective.