Các lỗi thường gặp

Code :
  • Code: 200
  • Description: Decoding process is not completed at the end of phase C.
  • Causes: Defective SC PCB.
  • Code: 212
  • Description: Interface error occurred between the CPU and modem.
  • Causes: Modem is defective. (SC PCB) Software problem occurred. (SC PCB)
  • Code: 301
  • Description: System fault.
  • Causes: Software problem occurred. (SC PCB)
  • Code: 331
  • Description: 8-minutes timer error. (Germany only)
  • Causes:
  • Code: 390
  • Description: Interface error occurred between the machine and the PC.
  • Causes: Firmware update error. GDI print error. (Perform the operation again)
  • Code: 400
  • Description: T1 timer (35±5 sec.) elapsed without detecting 300 bps signal.
  • Causes: Wrong number is dialed and the START button is pushed. Telephone line is disconnected while dialing. SC PCB (Modem) or MJR PCB are defective. Receiver is defective. (It may only be transmitting CED)
  • Code: 401
  • Description: DCN was returned from receiver while transmitter is waiting for CFR or FTT.
  • Causes: Your machine's ID Number is not programmed. Possible incompatibility or incorrect Password.
  • Code: 402
  • Description: DCN was returned from receiver while transmitter is waiting for NSF/DIS.
  • Causes: Receiver working in non-CCITT mode only. (Possible incompatibility)
 < 1 2 3 4 5 6 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục