Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF8300 — Trang 2/4

Code: E5-19

Description: Scanner Line Synchronization
Causes: 1. SC/SPC PCB connector is disconnected. 2. SC/SPC PCB is defective.

Code: E5-40

Description: Sort Memory Abnormal
Causes: 1. Sort Memory defective. 2. SC PCB connector is disconnected. 3. SC PCB defective.

Code: E7-90

Description: Hardware Key Abnormal
Causes: 1. Incorrect Hardware Key is installed. 2. Hardware Key is defective.

Code: J01

Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:

Code: J02

Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:

Code: J43

Description: Paper Jam in the Registration Sensor or Paper Path Sensor.
Causes:

Code: J44

Description: Paper Jam in the Paper Exit Sensor.
Causes:

Code: J71

Description: Original was longer than 39.3 in (1m). (Information Code 031 is printed on the Transaction Journal instead.)
Causes:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie