Description: Scanner home position error 1
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • SIB defective • Scanner home position sensor connector defective • Scanner drive motor connector defective
Description: Scanner home position error 2
The scanner home position sensor does not detect the off condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • SIB defective • Scanner home position sensor connector defective • Scanner drive motor connector defective
Description: Charge roller current correction error
The charge roller bias correction is performed twice even if the maximum charge roller bias (-2000V) is applied to the roller.
Description: Polygon motor error
The polygon motor does not reach its operating speed within 20 seconds after the polygon motor on signal, or the lock signal is still activated for more than 20 seconds after the polygon motor off signal.
Causes: • Polygon motor defective • Poor connection between the polygon motor driver and the BICU board • BICU board defective
Description: No laser writing signal (F-GATE) error 1
The laser writing signal (F-GATE) does not go to LOW for more than 15 seconds after the copy paper reaches the registration sensor.
Causes: • BICU board defective • Poor connection of the fax controller or printer controller • Fax controller or printer controller defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.