Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1045 — Trang 10/15

Code: 730

Description: Finisher stapler positioning motor error
After the stapler motor is turned on, the stapler does not return to its home position within the specified time, or the stapler HP sensor does not activate within the specified time after the stapler motor is turned on.
Causes: • Stapler positioning motor defective or overloaded • Stapler HP sensor defective • Stapler positioning motor connection loose or connector defective

Code: 731

Description: Finisher exit guide open/close motor error
After the finisher exit guide open/close motor is turned on, the open/close sensor does not activate within the specified time.
Causes: • Finisher exit guide open/close motor defective • Open/close sensor defective

Code: 732

Description: Finisher upper tray shift motor error
The upper tray shift motor does not stop within the specified time.
Causes: • Upper tray shift motor defective or overloaded • Upper tray shift sensor defective

Code: 733

Description: Finisher lower tray lift motor error
The stack height sensor does not activate within a certain time period after the lower tray lift motor turned on.
Causes: • Lower tray lift motor defective or overloaded • Upper stack height sensor defective • Lower tray lower limit sensor defective

Code: 734

Description: Finisher lower tray shift motor error
The lower tray shift motor driving the lower tray does not stop within the specified time.
Causes: • Lower tray shift motor defective or overloaded • Lower tray shift sensor defective

Code: 800

Description: Startup without video output end error (K)
Video transfer to the engine is started, but a video transmission end command was not issued by the engine within the specified time.
Causes: • Control board defective

Code: 804

Description: Startup without video input end (K)
A video transmission was requested from the scanner, but a video transmission end command was not issued by the scanner within the specified time.
Causes: • Control board defective

Code: 819

Description: Kernel mismatch error
Software bug
Causes: • Software application error
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie