Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1075 — Trang 15/25

Code: 737

Description: Trimmed staple waste hopper full
The hopper that holds the waste from staple trimming is full.
Causes: • Staple waste hopper full
• Staple waste sensor defective

Code: 738

Description: Finisher pressure plate motor error
The pressure plate motor switches on but does not return to the home position within the prescribed time after 2 counts
Causes: • HP sensor defective
• Harness disconnected, defective
• Motor defective
• Finisher main board defective
• Motor overload

Code: 739

Description: Finisher folder plate motor error
The folder plate motor turns on but the plate does not return to the home position within the prescribed time for 2 counts
Causes: • Plate HP sensor defective
• Harness disconnected, defective
• Folder plate motor defective
• Finisher main board defective
• Folder plate motor overload

Code: 740

Description: Finisher front saddle-stitch stapler motor error B140
Saddle-stitch stapler motor fails to operate within 450 ms within 2 counts..
Causes: • HP sensor defective
• Harness disconnected, defective
• Stapler motor defective
• Finisher main board defective
• Stapler motor overload

Code: 740

Description: Finisher corner stapler motor error B246
The stapler motor does not switch off within the prescribed time after operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Staple jam
• Number of sheets in the stack exceeds the limit for stapling
• Stapler motor disconnected, defective

Code: 741

Description: Finisher rear saddle-stitch stapler motor error B140
Saddle-stitch stapler motor fails to operate within 450 ms within 2 counts..
Causes: • HP sensor defective
• Harness disconnected, defective
• Stapler motor defective
• Finisher main board defective
• Stapler motor overload

Code: 741

Description: Finisher corner stapler rotation motor error B246
The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler rotation motor disconnected, defective
• Stapler rotation motor overloaded due to obstruction
• Stapler rotation HP sensor disconnected, defective

Code: 742

Description: Finisher jogger side fence motor error B140
The jogger motor turns on but the side fences to not return to the home position within 340 pulses for 2 counts.
Causes: • HP sensors defective
• Harness disconnected, defective
• Motor defective
• Finisher main board defective
• Motor overload
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie