• Code: 763
• Description: Punch movement motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
• Causes: • Motor harness disconnected, loose, defective
  • Motor defective

• Code: 764
• Description: Paper position sensor slide motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective
  • Motor defective

• Code: 765
• Description: Folding unit bottom fence lift motor
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
• Causes: • Motor harness disconnected, loose, defective
  • Motor defective

• Code: 766
• Description: Clamp roller retraction motor error
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
• Causes: • Motor harness disconnected, loose, defective
  • Motor defective

• Code: 767
• Description: Stack junction gate motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective
  • Motor overload
  • Motor defective

• Code: 770
• Description: Cover interposer tray bottom plate motor error
  • After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s).
  • After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate
• Causes: • Bottom plate position sensor, disconnected, defective
  • Bottom plate HP sensor disconnected, defective

• Code: 780
• Description: Z-Fold feed motor error
  The feed motor does not attain the prescribed speed within the specified time.
• Causes: • Feed motor disconnected, defective
  • Feed motor overloaded due to obstruction
  • Feed motor lock

• Code: 781
• Description: Z-Fold lower stopper motor
  The lower stopper motor does not attain the prescribed speed within the specified time.
• Causes: • Lower stopper motor disconnected, defective
  • Lower stopper motor overloaded due to obstruction
  • Lower stopper HP sensor disconnected, defec