Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1085 — Trang 14/18

Code: SC720

Description: Finisher transport motor error
The encoder pulse of the transport motor does not change state (high/low) within a certain period of time.
Causes: • Finisher transport motor defective or poor connection • Finisher main board defective • Too much load on drive mechanism

Code: SC722

Description: Finisher jogger motor error
1) The finisher jogger H.P sensor remains de-activated for more than a certain time when returning to home position. 2) The finisher jogger H.P sensor remains activated for more than a certain time when moving away from home position.
Causes: • Jogger H.P sensor defective • Jogger motor defective

Code: SC724

Description: Finisher staple hammer motor error
Stapling does not finish within a certain time after the staple hammer motor turned on.
Causes: • Staple hammer motor defective • Staple jam

Code: SC725

Description: Finisher stack feed-out motor error
The stack feed-out belt H.P sensor does not activate within a certain time after the stack feed-out motor turned on.
Causes: • Stack feed-out H.P sensor defective • Stack feed-out motor defective

Code: SC726

Description: Finisher shift/lift motor error
Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
Causes: • Shift motor defective • Shift tray lift motor defective

Code: SC727

Description: Finisher stapler rotation motor error
1) Stapler rotation does not finish within a certain time after the stapler rotation motor turned on. 2) The stapler does not return to its home position within a certain time after stapling finished.
Causes: • Stapler rotation motor defective • Poor stapler rotation motor connection

Code: SC729

Description: Finisher punch motor error
The punch H.P sensor does not activate within a certain time after the punch motor turned on.
Causes: • Punch motor defective • Punch H.P sensor defective • Poor punch motor connection

Code: SC730

Description: Finisher stapler position motor error
1) The stapler H.P. sensor stays on for longer than normal when the stapler motor turns on to return the stapler to its home position. 2) The stapler H.P sensor does not turn on within a certain time after the stapler motor turned on to move the stapler away from home position.
Causes: • Stapler motor defective • Stapler H.P sensor defective • Poor stapler motor connection
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie