Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 120 — Trang 3/4

Code: 500

Description: Main motor lock error
Failed to detect main motor lock signal for 7 checks in succession (total of 700ms) after main motor started to rotate, or after last lock signal was detected.
Causes: • Main motor defective • Too much load on the drive mechanism • Motor driver damaged

Code: 541

Description: Fusing thermistor open
Thermistor generated abnormal values immediately after 24V power on.
Causes: • Fusing thermistor defective or disconnected • Fusing lamp defective • Fuse blown • PSU defective • Bad connection between fuser and machine

Code: 542

Description: Fusing temperature warm-up error
During fusing warm-up, fusing temperature failed to reach target range within 22 seconds (when starting at least 25°C below the target temperature).
Causes: • Fusing thermistor defective • Fusing lamp defective • Thermofuse blown • PSU defective • Bad connection between fuser and machine

Code: 543

Description: Fusing overheat error
Detected fusing temperature remained above 230°C for 1 second.
Causes: • Fusing thermistor defective • PSU defective

Code: 544

Description: Fusing low temperature error
Detected fusing temperature remained abnormally low for 1 second during fusing operation (below 140°C) or during standby mode.
Causes: • Fusing thermistor defective • PSU defective • Bad connection between fuser and machine

Code: 546

Description: Unstable fusing temperatureDetected that fusing temperature changed more than +-25°C/second two seconds in succession.
Causes: • Fusing thermistor defective • PSU defective • Bad connection between fuser and machine

Code: 547

Description: Zero-cross detection error
Detection error (detection overflow or busy) occurred 8 times in succession (at 20-ms intervals) while 24V power was on.
Causes: • PSU defective • FCU defective

Code: 548

Description: Fusing-temperature range violation (too high)
During paper transport, fusing temperature moved above limit (200°C for plain paper, 210°C for thick paper) and remained above limit for 10 seconds.
Causes: • TRIAC short • Fan not running
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie