Description: Finisher lower tray lift motor error
The stack height sensor does not activate within a certain time period after the lower tray lift motor turned on.
Description: Startup without video output end error (K)
Video transfer to the engine is started, but a video transmission end command was not issued by the engine within the specified time.
Description: Startup without video input end (K)
A video transmission was requested from the scanner, but a video transmission end command was not issued by the scanner within the specified time.
Description: Watch Dog Error
While the system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any other programs from executing.
Causes: • System program defective • Controller board defective • Peripheral device malfunction