• Code: 722
• Description: Finisher jogger motor error
  The finisher jogger HP sensor does not return to the home position, or move out of the home position, within the specified time.
• Causes: • Jogger HP sensor defective • Jogger motor defective

• Code: 724
• Description: Finisher staple hammer motor error
  Stapling does not finish within 600 ms after the staple hammer motor turned on.
• Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective

• Code: 725
• Description: Finisher stack feed-out motor error
  The stack feed-out belt HP sensor does not activate within a certain time after the stack feed-out motor turned on.
• Causes: • Stack feed-out HP sensor defective • Stack feed-out motor overload • Stack feed-out motor defective

• Code: 726
• Description: Finisher shift tray 1 lift motor error
  Tray shift does not finish within the specified time after the shift motor turned on, or the stack height sensor does not activate within the specified time after the shift tray lift motor turned on.
• Causes: • Shift motor defective or overloaded • Shift tray lift motor defective or overloaded

• Code: 727
• Description: Finisher stapler rotation motor error
  Stapler rotation does not finish within the specified time after the staple rotation motor turned on, or the stapler does not return to its home position within the specified time after stapling finished.
• Causes: • Stapler rotation motor defective or overloaded • Stapler rotation motor connection loose or connector defective

• Code: 729
• Description: Finisher punch motor error
  After the punch motor is turned on, the punch HP sensor does not activate within the specified time.
• Causes: • Punch motor defective or overloaded • Punch HP sensor defective • Punch motor connection loose or connector defective

• Code: 730
• Description: Finisher stapler positioning motor error
  After the stapler motor is turned on, the stapler does not return to its home position within the specified time, or the stapler HP sensor does not activate within the specified time after the stapler motor is turned on.
• Causes: • Stapler positioning motor defective or overloaded • Stapler HP sensor defective • Stapler positioning motor connection loose or connector defective

• Code: 731
• Description: Finisher exit guide open/close motor error
  After the finisher exit guide open/close motor is turned on, the open/close sensor does not activate within the specified time.
• Causes: • Finisher exit guide open/close motor defective • Open/close sensor defective