Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 2105 — Trang 19/21

Code: SC870

Description: Address Book Data Error
Address book data stored on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective.
Causes: • Software defective; switch off/on, and change the controller firmware if the problem is not solved • HDD defective

Code: SC880

Description: Media Link Board Error
A request for access to the Media Link Board was not answered within the specified time.
Causes: • Media Link Board defective

Code: SC900

Description: Electrical Total Counter Error
The total counter contains data that is not a number.
Causes: • NVRAM disturbed unexpectedly • NVRAM defective • NVRAM data corrupted

Code: SC901

Description: Mechanical Total Counter Error
The mechanical total counter is disconnected.
Causes: • User removed the counter while it was operating • Poor connection • Mechanical total counter defective

Code: SC919

Description: External Controller Error 6
While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller • EFI controller was rebooted • Connection to EFI controller loose

Code: SC920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective; switch off/on, or change the controller firmware if the problem is not solved • Insufficient memory

Code: SC921

Description: Printer Error 2
When the printer application started, the font to use could not be found on the SD card.
Causes: • The font is not on the SD card

Code: SC925

Description: NetFile Function Error
The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used.
Causes: • HDD defective • Power supply to machine cut occurred while writing data to HDD • Software error
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie