Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 270 — Trang 5/8

Code: SC547

Description: Zero cross signal malfunction
Zero cross signals are not detected within a certain period.
Causes: • Power supply board defective • IOB defective • BICU defectivechanism

Code: SC590

Description: Exhaust fan motor error
The CPU detects an exhaust fan lock signal for more than 3.5 seconds.
Causes: • Poor connection of the exhaust fan motor • Too much load on the motor drive

Code: SC610

Description: Communication error between IOB and duplex unit
The IOB cannot communicate with the duplex unit properly.
Causes: • Poor connection between the IOB and duplex unit • IOB defective • Duplex control board defective

Code: SC620

Description: Communication error between IOB and ADF
The IOB cannot receive a response from the ADF main board for 4 seconds or more.
Causes: • Poor connection between the IOB and ADF main board (DF connector) • ADF main board defective • IOB defective

Code: SC691

Description: Communication error between BICU and fax controller
The BICU board cannot communicate with the fax controller properly.
Causes: • Poor connection between the BICU board and the fax controller • BICU board defective • Fax controller defective

Code: SC692

Description: Communication error between BiCU and printer controller
The BICU board cannot communicate with the printer controller properly.
Causes: • Poor connection between the BICU board and the mother board. • Poor connection between the mother board and the printer controller • BICU board defective • Printer controller defective • Mother board defective

Code: SC694

Description: Communication error between BICU and scanner controller
The BICU board cannot communicate with the scanner controller properly.
Causes: • Poor connection between the BICU board and the mother board. • Poor connection between the mother board and the scanner controller • BICU board defective • Scanner controller defective • Mother board defective

Code: SC696

Description: Communication error between IOB and finisher
The IOB cannot communicate with the finisher properly.
Causes: • Poor connection between the IOB and finisher • IOB defective • Finisher main board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie