Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 401

Code: SC101

Description: Lamp regulator error
Detects lamp regulator malfunctions by monitoring the signal for both the exposure lamp on and off signals.
Causes: • Lamp regulator board defective • Exposure lamp open • Optics thermoswitch open • EX-IPU board defective • FU1 on the lamp stabilizer board is blown

Code: SC120

Description: Scanner home position error 1
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • EX-IPU board defective

Code: SC121

Description: Scanner home position error 2
The scanner home position sensor does not detect the off condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • EX-IPU board defective

Code: SC190

Description: EX-IPU board error 1
An error is detected during the ASIC register check.
Causes: • EX-IPU board defective

Code: SC191

Description: EX-IPU board error 2
The SRAM in the EX-IPU board is defective.
Causes: • EX-IPU board defective

Code: SC302

Description: Charge current leak
A charge current leak signal is detected.
Causes: • Charge corona end block damaged • Charge corona receptacle damaged • Charge high voltage supply board defective

Code: SC303

Description: Charge wire cleaner error
The charge wire cleaner is detected over the image processing area.
Causes: • Charge wire cleaner drive motor defective • Insufficient lubrication for the charge wire cleaner drive mechanism (G501 grease)

Code: SC305

Description: Time out error (memory)
The BCU cannot receive the memory access ready signal from the EX-IPU
Causes:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie