Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 700 — Trang 15/18

Code: SC731

Description: Finisher paper exit guide plate motor lock
The exit plate HP sensor does not turn on within 800 ms when the exit plate returns to its home position.
Causes: • Exit plate motor defective • Too much load to exit plate motor • Exit plate motor connector defective • Exit plate HP sensor defective • Main board defective

Code: SC735

Description: Finisher pre-stack motor error
It occurs 2 times consecutively that the pre-stack HP sensor is not activated within 400 pulses after the pre-stack motor starts.
Causes: • Pre-stack HP sensor defective or poor connection • Pre-stack motor defective • Finisher main board defective • Too much load on the drive mechanism

Code: SC736

Description: Finisher paper exit guide plate motor error
It occurs 2 times consecutively that the paper exit guide plate HP sensor is not activated within 750 ms after the paper exit guide plate motor starts.
Causes: • Paper exit guide plate sensor defective or poor connection • Paper exit guide plate motor defective • Finisher main board defective • Too much load on the drive mechanism

Code: SC737

Description: Finisher staple waste full
The box for staple waste becomes full.
Causes: • Box is full of staple waste • Staple waste sensor defective

Code: SC738

Description: Finisher shift tray lift motor error
It occurs 2 times consecutively that; 1) The stack height sensor is not activated within 50 seconds after the motor starts lifting the tray. 2) The stack height sensor is still activated 5 seconds after the motor starts lowering the tray.
Causes: • Stack height sensor defective or poor connection • Shift tray lift motor defective • Finisher main board defective • Too much load on the drive mechanism

Code: SC740

Description: 1,000-sheet finisher error in finisher area
NOTE: When this SC is displayed, check SP7-902 (SC detail). The first 2 digits indicate the type of error. Example: 740 0100000000000000
Causes:

Code: SC741

Description: 1000 sheet finisher error in saddle stitching area
NOTE: When this SC is displayed, check SP7-902 (SC detail). The first 2 digits indicate the type of error. Example: 741 0100000000000000
Causes:

Code: SC900

Description: Electrical total counter error
The total counter contains something that is not a number.
Causes: • NVRAM defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie