Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 700P — Trang 17/18

Code: SC959

Description: Printer setting ID error
The ID that is sent from the IPU for the printer setting signal is different from expected.
Causes: • Software error

Code: SC960

Description: Printer return ID error
The ID that is sent from the IPU for the printer return signal is different from expected.
Causes: • Software error

Code: SC961

Description: Printer ready ID error
The ID that is sent from the printer controller in the printer controller printing ready condition is incorrect.
Causes: • Software defective

Code: SC962

Description: Memory setting ID error
The ID that is sent from the memory when the IPU sent the memory ready signal is incorrect.
Causes: • Software defective

Code: SC963

Description: Memory finishing ID error
The ID that is sent from the memory when the IPU sent the memory finish signal is incorrect.
Causes: • Software defective

Code: SC964

Description: Printer ready error
The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
Causes: • Software defective

Code: SC966

Description: No laser writing signal (F-GATE) error 2
The level of the laser writing signal (F-GATE) fails to reach LOW for more than 15 seconds after the copy paper reaches the registration sensor.
Causes: • Poor cable connection with the polygon mirror motor driver • Polygon mirror motor (driver) defective • BICU defective

Code: SC970

Description: Scanner ready error
The MCU does not send the ready signal for 10 seconds after the scanning start command is sent to the MCU.
Causes: • Communication error between BICU and MCU • MCU software defective • Buffer is full
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie