• Code: SC850
• Description: Network interface error The network is unusable.
• Causes: • Defective controller
• Remedy: 1. Turn the main switch off and on. 2. Replace the controller.

• Code: SC851
• Description: IEEE1394 interface error The 1394 interface is unusable.
• Causes: • Defective IEEE1394 • Defective controller.
• Remedy: 1. Turn the main switch off and on. 2. Replace the IEEE1394 interface board. 3. Replace the controller.

• Code: SC860
• Description: HDD: Initialization error The controller detects that the hard disk fails.
• Causes: • HDD not initialized • Defective HDD
• Remedy: 1. Turn the main switch off and on. 2. Reformat the HDD. 3. Replace the HDD.

• Code: SC861
• Description: HDD: Reboot error The HDD does not become ready within 30 seconds after the power is supplied to the HDD.
• Causes: • Loose connection • Defective cables • Defective HDD • Defective controller
• Remedy: 1. Turn the main switch off and on. 2. Check the connection between the HDD and controller. 3. Check and replace the cables. 4. Replace the HDD. 5. Replace the controller.

• Code: SC863
• Description: HDD: Read error The data stored in the HDD cannot be read correctly.
• Causes: • Defective HDD • Defective controller
• Remedy: 1. Turn the main switch off and on. 2. Replace the HDD. 3. Replace the controller.

• Code: SC864
• Description: HDD: CRC error While reading data from the HDD or storing data in the HDD, data transmission fails.
• Causes: • Defective HDD
• Remedy: 1. Turn the main switch off and on. 2. Replace the HDD.

• Code: SC865
• Description: HDD: Access error An error is detected while operating the HDD.
• Causes: • Defective HDD
• Remedy: 1. Turn the main switch off and on. 2. Replace the HDD.

• Code: SC900
• Description: Electric counter error Abnormal data is stored in the counters.
• Causes: • Defective NVRAM • Defective controller
• Remedy: 1. Turn the main switch off and on. 2. Check the connection between the NVRAM and controller. 3. Replace the NVRAM. 4. Replace the controller.