Mã lỗi Ricoh Aficio AP828 — Trang 12/13
Code:
Tất cả lỗi (98)
SC 461-001
SC 461-002
SC 502
SC195
SC201
SC220
SC221
SC230
SC231
SC240
SC260
SC261
SC285
SC370
SC371
SC372
SC373
SC374
SC375
SC376
SC377
SC380
SC381
SC385
SC386
SC387
SC388
SC389
SC390
SC391
SC460-001
SC460-002
SC471
SC490
SC501
SC503-01
SC503-02
SC504-01
SC504-02
SC530
SC541
SC542
SC543
SC544
SC545
SC546
SC551
SC552
SC553
SC554
SC555
SC556
SC560
SC621
SC622
SC623
SC640
SC641
SC670
SC680
SC687
SC722
SC724
SC725
SC726
SC727
SC729
SC730
SC731
SC732
SC733
SC734
SC818
SC819
SC820
SC820
SC820
SC821
SC822
SC823
SC824
SC827
SC828
SC829
SC833
SC835
SC836
SC837
SC850
SC851
SC860
SC861
SC863
SC864
SC865
SC900
SC990
SC998
Description: Network interface error The network is unusable.
Causes: • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Replace the controller.
Description: IEEE1394 interface error The 1394 interface is unusable.
Causes: • Defective IEEE1394 • Defective controller.
Remedy: 1. Turn the main switch off and on. 2. Replace the IEEE1394 interface board. 3. Replace the controller.
Description: HDD: Initialization error The controller detects that the hard disk fails.
Causes: • HDD not initialized • Defective HDD
Remedy: 1. Turn the main switch off and on. 2. Reformat the HDD. 3. Replace the HDD.
Description: HDD: Reboot error The HDD does not become ready within 30 seconds after the power is supplied to the HDD.
Causes: • Loose connection • Defective cables • Defective HDD • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Check the connection between the HDD and controller. 3. Check and replace the cables. 4. Replace the HDD. 5. Replace the controller.
Description: HDD: Read error The data stored in the HDD cannot be read correctly.
Causes: • Defective HDD • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Replace the HDD. 3. Replace the controller.
Description: HDD: CRC error While reading data from the HDD or storing data in the HDD, data transmission fails.
Causes: • Defective HDD
Remedy: 1. Turn the main switch off and on. 2. Replace the HDD.
Description: HDD: Access error An error is detected while operating the HDD.
Causes: • Defective HDD
Remedy: 1. Turn the main switch off and on. 2. Replace the HDD.
Description: Electric counter error Abnormal data is stored in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Check the connection between the NVRAM and controller. 3. Replace the NVRAM. 4. Replace the controller.