Mã lỗi Ricoh Aficio CL2000 — Trang 3/7
Code:
Tất cả lỗi (51)
201
230
302
440
441
471
486
487
530
531
532
543
544
554
580
581
622
640
641
670
680
818
819
820
821
822
823
824
827
828
829
835
836
837
850
851
853
854
855
856
857
860
861
863
864
865
900
990
991
998
999
Description: Option paper unit communication error After the system starts, the communication with the paper tray is unexpectedly interrupted.
Causes: • Defective cable connection
Remedy: 1. Connect the cable to the paper tray correctly.
Description: Controller to engine communication error. Checksum error detected between the controller and the engine board.
Causes: • Defective controller • Defective engine board
Remedy: 1. Check the connection between the controller and the engine board. 2. Replace the engine board if the error is frequent. 3. Replace the controller board if the error is frequent.
Description: Controller to engine communication error. The controller receives no response from the engine board.
Causes: • Defective controller • Defective engine board
Remedy: 1. Check the connection between the controller and the engine board. 2. Replace the engine board if the error is frequent. 3. Replace the controller board if the error is frequent.
Description: Engine start-up error The ready signal from the engine board is not detected.
Causes: • Defective engine board.
Remedy: Replace the engine board.
Description: EEPROM error Data is not write to or read from the EEPROM.
Causes: • Defective EEPROM (IC5) • Defective engine control board
Remedy: 1. Replace the EEPROM. 2. Replace the engine control board.
Description: System timeout error System program timeout error detected.
Causes: • Defective controller
Remedy: Replace the controller if it occurs frequently.
Description: Kernel stop error Unexpected CPU error by the ASIC/ RAM full detected.
Causes: • Defective controller
Remedy: Replace the controller if it occurs frequently.
Description: Self-diagnostic error . CPU CPU error detected during self-diagnostic.
Causes: • Defective controller
Remedy: Replace the controller if the error is frequent.