Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Color 2103 — Trang 11/12

Code: SC792

Description: Projector lamp overheat Type: 4 - Description - The projector diagnostics notify the scanner IPU board that the projector lamp has overheated. Then the scanner IPU board notifies the SCU of it. - Detection Timing - When the projector is active
Causes: • Projector control board SP-Log: 7-402-7

Code: SC900

Description: Main counter disabled Type: 2 - Description - Communication error between the main counter and main control board - Detection Timing - When counter information is uploaded or downloaded
Causes: • Main counter • Main control board • SCU harness SP-Log: 7-402-9

Code: SC901

Description: Inconsistent main counter and backup counter Type: 2 - Description - This SC is displayed when the difference between the main and backup counter values is more than ±5. - Detection Timing - When the power switch is turned on When the Counter key is pressed
Causes: • Main counter SP-Log: 7-402-9

Code: SC902

Description: SCU-SCSI communication error Type:1 - Description - This SC occurs when the power switch is turned on and neither the scanner IPU board nor main control board is recognized or when an initial error occurs in the SCSI driver. - Detection Timing - Always
Causes: • SCU • SCSI cable SP-Log: 7-402-6

Code: SC903

Description: Serial communication error Type: 1 - Description - This SC is displayed when a counter serial I/O error is detected on the optics fiber cable between the SCU and the main control board for a successive five times. - Detection Timing - Always
Causes: • SCU • Main control board • Fiber cable SP-Log: 7-402-6

Code: SC920

Description: SCU/RAM board abnormal Type: 2 - Description - The SCU executes the read/write test for the RAM board on the SCU and the read/write operation is not successfully done. This SC is not displayed just after the read/write test because the CPU enters the hold state. It is displayed after the power switch is turned off and on. - Detection Timing - When the power switch is turned on
Causes: • RAM board SP-Log: 7-402-9

Code: SC931

Description: Printer NV-RAM abnormal Type: 1 - Description - When the main control board detects that illegal NV-RAM data has been loaded from the SCU, it notifies the SCU of an anomaly. - Detection Timing - When the power switch is turned on
Causes: • RAM board (Battery) • Main control board SP-Log: 7-402-9

Code: SC990

Description: I/O control board 1 abnormal Type: 2 - Description - This SC is displayed when a serial/parallel I/O error is detected in the I/O control board 1 for a successive five times. - Detection Timing - Always
Causes: • I/O control board 1 • Corona unit setting error • Connector/harness • Main control board SP-Log: 7-402-9
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie