• Code: SC760
• Description: Finisher punch motor error
  The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Punch HP sensor disconnected, defective • Punch motor disconnected, defective • Punch motor overload due to obstruction

• Code: SC761
• Description: Finisher folder plate motor error
  The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Folder plate HP sensor disconnected, defective • Folder plate motor disconnected, defective • Folder plate motor overloaded due to obstruction.

• Code: SC762
• Description: Finisher pressure plate motor error
  Pressure plate motor operating but the plate is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Pressure plate HP sensor disconnected, defective • Pressure plate motor disconnected, defective • Pressure plate motor overloaded due to obstruction

• Code: SC763
• Description: Punch movement motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC764
• Description: Paper position sensor slide motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC765
• Description: Folding unit bottom fence lift motor
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC766
• Description: Clamp roller retraction motor error
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC767
• Description: Stack junction gate motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor overload • Motor defective