Danh mục sản phẩm

Code :

Code: SC700
Description: Finisher tray motor error (optional finisher only) -Definition- [B] The stack height sensor does not detect on/off within a certain period after the tray lift motor is turned on, so that the tray keeps moving up or down.
Causes: · Tray lift motor defective · Finisher drive board defective

Code: SC701
Description: Finisher inverter error (optional finisher only) -Definition- [B] The jogger H.P. sensor does not detect on/off within a certain period after the jogger motor is turned on. The feed belt H.P. sensor does not detect on/off within a certain period after the feed-out motor is turned on.
Causes: · Jogger motor defective · Feed-out motor defective · Finisher drive board defective

Code: SC702
Description: Finisher staple error (optional finisher only) -Definition- [B] The staple home position sensor does not detect the on condition within 0.5 seconds after the staple motor on signal.
Causes: · Staple motor defective · Finisher drive board defective

Code: SC703
Description: Finisher shift tray motor error (optional finisher only) -Definition- [B] The shift position sensor does not detect the on condition within a certain period after the shift motor is turned on.
Causes: · Shift motor defective · Finisher drive board defective

Code: SC800
Description: Communication error between 4-bin mailbox and BECU (optional 4- bin mailbox only) -Definition- [B] The BECU board cannot communicate with the 4-bin mailbox properly.
Causes: · Poor connection of the interface connector for the 4-bin mailbox · BECU board defective · 4-bin mailbox main control board defective

< 1 2 3

0