Description: Booklet Stapler Output Motor
The stack feed out belt HP sensor failed to detect the feed out belt at the home position within the specified time.
Causes: • If the booklet stapler output motor is operating: 1 Stack feed out belt HP sensor harness loose, broken, defective 2 Stack feed out belt HP sensor defective
• If the booklet stapler output motor is not operating: 1 Motor blocked by an obstruction 2 Motor harness loose, broken, defective 3 Motor defective 4 Finisher main board defective
Description: Monitor Error
This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.
Causes: • OS Flash ROM data defective; change the controller firmware
• SD card data defective; use another SD card
Description: Self-Diagnostic Error 7: Engine I/F ASIC
A read/write verify error done on the resident RAM on the mother board (Engine I/F board failed).
Causes: • Replace RAM DIMM on the mother board.
• Replace mother board
Description: Wireless LAN Error 1
The board that holds the wireless LAN card can be accessed, but the wireless LAN card (802.11b/Bluetooth) itself could not be accessed while the machine was starting up.
Description: Wireless LAN Error 2
The board that holds the wireless LAN card can be accessed, but the wireless LAN card (802.11b/Bluetooth) itself cannot be could not be accessed while the machine was operating.